AMMO REFLEX PRO II ENAMEL COAT

Home / Paint Ceramic / AMMO REFLEX PRO II ENAMEL COAT

The slickest AMMO Coating ever.

AMMO REFLEX PRO II ENAMEL COAT is a new formula that provides the same protection and durability as the original Reflex Pro, now enhanced with super-slick hydrophobic properties. It goes on smooth for easy application and will enhance your paint's color and clarity for 1-2 years. Reflex Pro II can be layered over the original Reflex Pro. Use at least 1/2 bottle per application and two coats can be applied after a 30 minute cure in between. Maintain Reflex Pro II in-between applications with Reflex Pro Top Coat. *INCLUDES 1 MF APPLICATOR*

The slickest AMMO Coating ever
Up to 2 years durable ceramic protection
Incredible water beading properties
Increased gloss, paint depth, and shine
Makes future cleaning easier
Can be layered over previous coats of Reflex Pro

1. Wear latex gloves, eye protection, mask, and work in a well-ventilated area.

2. Prior to first coat application, wash and clay the paint if needed.

3. If needed, use isopropyl alcohol mixed 50-50 with water or an automotive grade wax and silicone remover to decontaminate surface.

4. Prime microfiber applicator and apply in overlapping motions in 2x2 sections. Paint should be cool to the touch and out of direct sunlight.

5. Allow 2 minutes dwell time (wait for the rainbow to appear) in ideal low-humidity conditions. In a humid environment or over PPF, buff off directly after application.

6. Lightly remove excess with clean microfiber towels. Use first towel to level + lift residue and second towel for final wipe.

7. Use at least 1/2 bottle per application.

8. Can apply two coats, with 30 minute cure time in between.

9. Allow 8 hours cure time in warm weather, 16 hours in cold. No water for 6 hours (min) after application. No washing for 5 days.

AMMO Foam Paint Cleanser

$32.00

AMMO Hydrate Paint Moisturizer

$54.00

AMMO Spit Emergency Shine

$47.00

AMMO REFLEX PRO TOP COAT

$75.00

Fantastic Product

Easy to apply; tremendous shine. And with Larry’s helpful videos it’s a joy to tackle as a DIY few-hours in the beloved garage.

See All Reviews

Is Reflex Pro II a Ceramic Coating?

How do I maintain Reflex Pro II?

Maintenance is exactly the same as a non-coated car, however, abrasives will remove the coating. In other words, perform a healthy wash (when needed) with AMMO Foam or favorite car soap, dry with Hydrate, and use Reflex Pro Top Coat as often as you feel is required. The more layers of protetection (Skin, Reflex Pro Top Coat, Blush, etc...) the more protected the "base layer" of Reflex Pro II will be.

How long does Reflex Pro II take to cure?

Depends on humidity and ambient temps, but 30 secs to 2 minutes is the average flash time. In a hot humid environment, buff off directly after application. Half a bottle is advised for one application and minimum curing time of 6 hours in a dry environment. Two coats can be applied with 30 minute cure time in between. Reflex Pro II may take up to a week to fully set, do not wash for 5 days.

How do I prep the paint before applying Reflex Pro II?

Wash the paint, remove the contaminants with clay (if necessary), compound and polishing (if necessary) is always the best option as the Reflex II will have extra depth and shine over "leveled" paint. Light ISO wipes (spray on towel first) can be helpful if paint was recently waxed. You can layer Reflex Pro II over "old" layers of Reflex Pro without removing the old layer. Apply out of direct sunlight and paint should be cool to the touch.

Can I use other paint care products (wax, sealant, spray wax) after Reflex Pro II is applied?

Is Reflex Pro II safe on matte paint or vinyl wraps?

Complete My Regimen

Fantastic Product

FAQ

Reviews

Customer Reviews